Archives: Shop

Nº 9554

The Nº 9554 double coat hook, based on a 19th century design often found in school houses and back halls, has ornamental ball finials terminating each hook. All NANZ plated and patinated finishes are available.

Nº 9600

The No 9600 full mortise flush bolt is designed to secure the inactive side of a double door. Usually installed in pairs at top and bottom, the bolt is activated by flipping the lever. Bolt lengths up to 48” are available to accommodate different door heights, and different strikes can be specified for various conditions. A rabbeted version is also available. The face measures 6-3/4″ x 1”. All Nanz finishes are available.

Nº 9604

The No 9604 large pocket door edge pull is designed for oversized or thick doors. The handle pivots outward by pushing on the top. It is used in conjunction with any of our pocket door flush pulls. The face measures 6 – 15/16” x 1 – 1/4” with a mortising depth of 3”. All NANZ plated and patinated finishes are available.

Nº 9622

In collaboration with Ralph Harvard, the No 9622 door stop was designed to work for standard swing conditions, the stop may be provided with a riser to work with saddled openings. Available in all standard plated and patinated finishes.

Nº 9631

The No 9631 baseboard-mounted doorstop mounts with a concealed screw and is bisected by a decorative step and astragal, creating a simple yet elegant detail. The rubber tip is non-marring and replaceable. It is available in a wide range of plated and patinated finishes.

Nº 9708

The 9708 hexagonal door knocker is faceted in section while the center terminates with a ball and a step. Its crisp modern edges but traditional shaping make it appropriate for a wide range of styles. All NANZ plated and patinated finishes are available.

Nº 9810

The No 9810 rectangular switch plate has stepped molding around the edge with a small cove forming a transition to the face of the plate. The classic design gracefully contributes to the level of finish of an interior, whether traditional or contemporary. Nanz manufactures any switch or outlet configuration and will make custom plates for elevators, intercoms, or other technical devices. It measures 4-1/2″ x 2-3/4”. Recommended finishes include antique brass, burnished brass, pewter, antique gold, and satin nickel. All Nanz plated and patinated <a href="/finishes/”>Finishes are available.

Nº 9810 2T 450×450

The No 9810 rectangular switch plate has stepped molding around the edge with a small cove forming a transition to the face of the plate. The classic design gracefully contributes to the level of finish of an interior, whether traditional or contemporary. This listing is for a 4-1/2″ x 4-1/2″ Two Gang Toggle Plate.

Nº 9854

Designed in our Soho studio, the Nº9854 Georgian Curtain Tieback affixes to the wall or moulding to create an ornamental attachment point for window treatments. All Nanz standard finishes are available.

Nº 9896

Straight Spindle for Levers. Please contact a representative to advise the proper length for your conditions.

Nº 9946

The No 9946 doorstop is floor mounted and features a cove base with domed top. It is 1-5/8” in length and is secured with a hidden fastener, which can be accessed by unscrewing the upper part of the cylinder. The rubber bumper is replaceable. All Nanz plated and patinated finishes are available.

Nº 9960 400

Staight Spindle for Knobs for 1-3/4″ Doors.

Nº 9969T 083

The 9969T dummy subrose is specified for inactive doors with a handle on one side only. A threaded half spindle passes through the opening to secure the handle.

Nº 9969U

The 9969U dummy subrose is specified for inactive doors with a handle on one side only. A threaded half spindle passes through the opening to secure the handle.