Archives: Catalog Items

Nº 7611

The No 7611 full mortise pocket door edge pull has a spring-released stirrup pull activated by the button on the faceplate. It can be used with most NANZ recessed pulls. All NANZ plated and patinated finishes are available.

Nº 7621

The No 7621 full mortise pocket door edge pull has a locking bolt and a spring-released bail activated by a button on the faceplate. It can be configured to operate cylinder-by-cylinder, cylinder-by-thumbturn, or thumbturn-by-emergency release, and can be used with most NANZ recessed pulls. All plated and patinated finishes are available, as are alternative lock configurations. When ordering, specify a backset of 2-1/2″, 2-3/4″, 3-3/4″, 5″, or 6”.

Nº 7624

The No 7624 full mortise narrow backset Entry, Dormitory, or Storeroom lockset incorporates an adjustable bevel faceplate and a one-piece latch. This lockset, specified for doors with narrow stiles, is designed for use with levers. It will accommodate doors 1-3/8″ or thicker. All NANZ plated and patinated finishes are available.

Nº 7631

The No 7631 full mortise edge pull is designed for double pocket doors. Each of the pair has a spring-released stirrup pull activated by the button on the face plate, while one has a locking bolt and its mate has a strike. It can be configured to operate cylinder-by-cylinder, cylinder-by-thumbturn, or thumbturn-by-emergency release, and can be used with most NANZ recessed pulls on the face of the door. When ordering, specify a backset of 2-1/2″, 2-3/4″, 3-3/4″, 5″, or 6”. All NANZ plated and patinated finishes are available.

Nº 7639

The No 7639 full mortise Privacy lockset, with narrow backset, is typically specified for bedrooms, bathrooms, and patios. The lockset incorporates an adjustable bevel faceplate and a one-piece latch. This lockset, specified for doors with narrow stiles, is designed for use with levers. It will accommodate doors 1-3/8″ or thicker. All NANZ plated and patinated finishes are available.

Nº 7641

The No 7641 full mortise auxiliary bolt is designed specifically to secure pocket doors. It can be configured to operate cylinder-by-cylinder, cylinder-by-thumbturn, or thumbturn-by-emergency release. When ordering, specify a backset of 2-1/2″, 2-3/4″, 3-3/4″, 5″, or 6”. All NANZ plated and patinated finishes are available.

Nº 7648

The No 7648 full mortise narrow backset Entry lockset, typically specified for apartments incorporates an adjustable bevel faceplate and a one-piece latch. A toggle locks and unlocks the outside handle. This lockset, specified for doors with narrow stiles, is designed for use with levers. It will accommodate doors 1-3/8″ or thicker. The faceplate measures 8″ x 1″, and backsets of 1-1/4″, 1-1/2″, 1-3/4″, 2″, 2-1/4″, and 2-1/2″ are available. All NANZ plated and patinated finishes are available.

Nº 7730

The No 7730 full mortise passage latch set for knobs is based on an interior mortise lock design manufactured in New England in the early 20th century. The lock shares the same measurements with the interior privacy lockset. It also shares a common mortise size for ease of door preparation. The bevel of the faceplate is adjustable for thicker doors. A strike plate and wrought metal dustbox are provided. All NANZ plated and patinated finishes are available.

Nº 7730MAG

The Nº 7730MAG full mortise passage latch set for knobs features a magnetic latch. It shares a common mortise size with other 7700 series locksets for ease of door preparation. The  strike requires no lip, allowing the lock to be fully concealed when the door is closed. All NANZ plated and patinated finishes are available.

Nº 7735

The No 7735 full mortise passage latch set for levers is based on an interior mortise lock design manufactured in New England in the early 20th century. The lock shares the same measurements with the interior privacy lockset. It also shares a common mortise size for ease of door preparation. The bevel of the faceplate is adjustable for thicker doors. A strike plate and wrought metal dustbox are provided. All NANZ plated and patinated finishes are available.

Nº 7735MAG

The Nº 7735MAG full mortise passage latch set for levers features a magnetic latch. It shares a common mortise size with other 7700 series locksets for ease of door preparation. The  strike requires no lip, allowing the lock to be fully concealed when the door is closed. All NANZ plated and patinated finishes are available.

Nº 7740

The No 7740 full mortise privacy lockset for knobs is based on an interior mortise lock design manufactured in New England in the early 20th century. It shares a common mortise size with other 7700 series locksets for ease of door preparation. The bevel of the faceplate is adjustable for thicker doors. A strike plate and wrought metal dustbox are provided. The lock shares its measurements with the interior passage latch set. The distance between the handle and the thumbturn is 3”. The bevel of the faceplate is adjustable for thicker doors. All NANZ plated and patinated finishes are available. The thumbturn spindle must be cut to extend no further than halfway through the thumbturn hub in order for the emergency release tool to retract the privacy bolt.