The No 8428 cabinet knob, a stylish conflation of modern minimalism and traditional ornament, recalls the drum-shaped knobs of the turn of the 20th century. A cove rings the straight sides, and the face rises in a shallow cone. The cabinet knob is available in five sizes. It is often specified with the companion No 1228 knob. Finished to order in a wide range of finishes.
The pronounced dome on the face of the Nº 8430S Cabinet Knob is circumscribed by an equally prominent knurled astragal. The cove-shaped shank accentuates the elegant proportions. All NANZ plated and patinated finishes are available.
The No 8435 cube cabinet pull, suitable for contemporary interiors, is adorned with a dimple on the face. The under side rests on a shallow disk to project the knob from the surface of the cabinet. Finished to order in a wide range of finishes.
The repeating face of the No 8436 cabinet knob is connotes a complex pattern using simple geometric forms. Its contrast of plateaus and valleys provide a dynamic surface for light and shadow. A polished finish allows the knob to express modernity while a patinated finish will highlight the modeling details. Finished to order in a wide range of finishes.
The No 8438 cabinet knob is a synthesis of traditional Georgian forms. A flat ring distinguishes the boss at the center from the ogival face of the knob. The drum-like shape, delineated by two astragals reflected across a cavetto profile, surmounts the contoured shank. It can be used in combination with the companion No 1438 knob. Finished to order in a wide range of finishes.
Designed in our Soho studio, this cabinet knob is available for use as a fixed dummy pull and is suitable for both traditional and contemporary interiors. Available in all standard plated and patinated finishes.
The No 8442 cabinet knob has a simple and elegant inverted bell design adorned with a ring of beads. This cabinet knob is available in all Nanz plated and patinated finishes.
The No 8456 Regency-period drop ring cabinet pull hangs from a sphere inscribed with a circle. The rosette has an ogee profile and an astragal edge. Four different ring diameters are available. Four sizes are available. All NANZ plated and patinated finishes are available.
The stylish Nº 8462 Cabinet Knob achieves a modern aesthetic by updating classical molding profiles. The face of the knob is an ogee, which meets an astragal as it approaches the curving side. The curved shank with stepped base sits upon an integral rosette. All Nanz plated and patinated finishes are available.
The No 8485 pyramidal cabinet knob with cavetto shank is appropriate for either modern or Arts and Crafts interiors, depending on the choice of finish. The knob is available in two sizes. All NANZ plated and patinated finishes are available.
The No 8487 faceted octagonal cabinet knob’s shallow pyramidal face is flanked on all sides by smaller facets. Its design transitions to an octagonal profile between the square base and top of the knob. As with all NANZ products it is available a variety of plated and patinated finishes.
The No 8488 faceted octagonal cabinet knob’s abstracted geometry and clean lines are uninterrupted by excess ornament. Its design transitions to an octagonal profile between the square base and top of the knob. The knob is available in three sizes. All NANZ plated and patinated finishes are available.
The No 8495 cabinet knob, originally made for the Dakota Apartment Building in New York in the late 19th century, has chamfered sides ringed by an astragal, and a shallow dome surrounded by a flat ring on the face. The knob is available in three sizes. All NANZ finishes are available.
The No 8500 modern handle embodies a minimalistic aesthetic with its simple cylindrical body and clearly defined bend. While the handle is simple in form, the unique design is hard to overlook. It can be mounted horizontally as a drawer pull or vertically as a cabinet pull. The simple cylindrical body of the pull is defined by its flat cut-out bend inspired by the No 2500 lever. Finished to order in a wide range of finishes. This pull has a 1/2″ diameter and is also available with a 5/8” diameter.
The No 8500 modern handle embodies a minimalistic aesthetic with its simple cylindrical body and clearly defined bend. While the handle is simple in form, the unique design is hard to overlook. It can be mounted horizontally as a drawer pull or vertically as a cabinet pull. The simple cylindrical body of the pull is defined by its flat cut-out bend inspired by the No 2500 lever. Finished to order in a wide range of finishes. This pull has a 5/8″ diameter and is also available with a 1/2” diameter.
Designed in our Soho studio, the No 8503 cabinet pull is suitable for contemporary and modern interiors. it is available in all standard NANZ plated and patinated finishes.
Click the 
to add an item to a
PORTFOLIO. This is the first step for:
Requesting PRICING
or
PURCHASING product,
or
SHARING product,
or
ORGANIZING product for future use.
Login