Archives: Catalog Items

EC-3735

The EC-3735 two knuckle cabinet hinge with plain cylindrical bushings recalls the International Modernism of the early 20th century. The two knuckle butt lift-off hinge with plain cylindrical bushings . It measures 2-1/2” x 1-3/4”.

EC-3945

The EC-3945 five knuckle butt hinge with button tips is suitable for decors ranging from the most traditional to ultramodern, depending on choice of finish. Larger and smaller hinges are available for different doors of varying thickness and trim conditions. Available in 3-1/2″ x 3-1/2″, 4″ x 4″, 4-1/2″ x 4-1/2″ and 5″ x 5″ sizes. See all available finishes here.

EC-3945BF

The EC-3945BF five knuckle butt hinge with ball finials is suitable for decors ranging from the most traditional to ultramodern, depending on choice of finish. Larger and smaller hinges are available for different doors of varying thickness and trim conditions. Available in 3-1/2″ x 3-1/2″, 4″ x 4″, 4-1/2″ x 4-1/2″ and 5″ x 5″ sizes. See all available finishes here.

EC-4003

The EC-4003 traditional anchor thumbturn can be used with all NANZ full mortise locksets. The backplate has a cove profile. See all available finishes here.

EC-4035

The EC-4035 modern half moon thumbturn with disk-shaped backplate can be used with all NANZ full mortise locksets. It is often used with the NANZ No 2006 Bauhaus lever. Backplate diameter is 1-5/8”. See all available finishes here.

EC-4300 and EC-9112

The EC-4300 cylinder collar with straight sides, shown with standard No 9112 mortise cylinder, has a compression spring to allow adjusting the depth of the cylinder by about 1/8″. See all available finishes here.

EC-4804

The EC-4804 traditional domed oval keyhole escutcheon was originally produced in the early 20th century. The escutcheon is suitable for use with NANZ interior locksets and thumbturns. It measures 1-3/4′′ x 1-1/4”. See all available finishes here.

EC-4811

Emergency release grommets are suitable for use with interior mortise locksets and thumbturns when a minimum of visible hardware is desired. The EC-4811 modern emergency release grommet with squared edge is often paired with the Nº 2006 Bauhaus lever. See all available finishes here.

EC-4946

The EC-4946 thumbturn with oval turnpiece features two exposed fasteners and is enclosed by a cavetto profile. Backplate diameter is 1-1/2”. See all available finishes here. See all available finishes here.

EC-5754PC

The EC-5754 multi-point escutcheon plate with eased edges and rounded corners can be paired with NANZ levers for use on most types of multi-point doors. The escutcheon is available for use with profile cylinders, US multi-point cylinders, and can be provided without a cylinder cutout for inactive leafs. It measures 9-3/8″ x 1-5/8″. See all available finishes here.

EC-5756PC

The EC-5756 multi-point escutcheon plate with square edges and rounded corners can be paired with NANZ levers for use on most types of multi-point doors. The escutcheon is available for use with profile cylinders, US multi-point cylinders, and can be provided without a cylinder cutout for inactive leafs. It measures 9-3/8″ x 1-5/8″. See all available finishes here.

EC-6001

The EC-6001 modern recessed pull reflects the minimalist, rectilinear aesthetic developed in architecture and interior design during the middle of the 20th century. The clean, rectangular opening plays against the larger, offset rectangle of the faceplate covering the recess. This pull is designed for pocket doors. It can be ordered with or without a thumbturn, emergency release, or cylinder for use with a pocket door lock. It measures 4-1/2” x 2-3/4”. See all available finishes here.