Archives: Catalog Items

Nº 9112

The No 9112 standard mortise cylinder features a Schlage cylinder keyway. Different lengths are available, depending on door thickness and other conditions. All NANZ plated and patinated finishes are available.

Nº 9114

The No 9114 floor mounted Georgian doorstop incorporates details from the No 1014 doorknob. Its shallow dome is enclosed by a gentle cove and astragal. Its base is completed with an ogee detail. It is available in all NANZ patinated and plated finishes.

Nº 9116

The No 9116 newel post finial consists of hand blown crystal sphere cut with slightly concave circular facets and a radial sunburst at the top, mounted to a brass shank. The overall height is 5-1/4″ and the diameter is 3-3/4”. The shank is available in all NANZ plated and patinated finishes.

Nº 9118

The No 9118 floor mounted doorstop incorporates details from both the No 1118 and No 1119 knob. Its shallow dome is topped with a slightly sunken boss. Its base is completed with an ogee detail. It is available in all NANZ patinated and plated finishes.

Nº 9121

xThe Nº 9121 cylindrical floor mounted doorstop features a stepped face as a decorative motif. It is secured with a hidden fastener, which can be accessed by unscrewing the upper part of the cylinder. The rubber is replaceable. All NANZ plated and patinated finishes are available.

Nº 9124

The Nº 9124 is a simple lever designed to operate “Lift and Slide” doors. The beveled escutcheon incorporates a positive stop mechanism that holds the lever in a locked or operable position. The handle is accented by a bold finial detail juxtaposed against dual-roped astragals that ring each end of the gently tapering handle. This classical design streamlines the Georgian style and is suitable for contemporary as well as traditional interiors. All NANZ plated and patinated finishes are available.

Nº 9143

The No 9143 heavy duty wall-mounted doorstop is installed using a hidden mount with a shield for either wood, stone, or concrete floors, as well as an exposed anchoring screw. The build in hold-open hook swings into an eye attached to the door. Most NANZ finishes are available.

Nº 9158

The No 9158 knife-edge pull, which is mortised into the edge of a single or double door, is ideal when a minimum of hardware is required. When the door is closed, only the 5/16″ wide edge is visible. It measures 4-1/4″ x 5/16″ with a depth of 3/4″ or 1”. All NANZ plated and patinated finishes are available.

Nº 9165

The Nº 9165 is a simple lever designed to operate “Lift and Slide” doors. The escutcheon incorporates a positive stop mechanism that holds the lever in a locked or operable position. The minimalism on the face of the shank and the edge of the escutcheon keeps it from looking too severe and makes it suitable for a variety of different styles and interiors. All NANZ plated and patinated finishes are available.

Nº 9168CR

The No 9168CR fastens to the exterior of the door indicating occupancy, status indication is represented by red for occupied and green for vacant depending on the position of the dial. The Nº 9168CR can be paired with a privacy lock, auxiliary deadbolt, or tubular privacy bolt, and any NANZ thumbturn. All NANZ plated and patinated finishes are available.

Nº 9174

The Nº 9174 turnbutton is a locking mechanism used to secure removable flush mounted panels such as doors, or most often window screens. It is available in all plated and patinated finishes.

Nº 9182

The wall-mounted pull-out closet rod extends to hold clothing on hangers and retracts into the wall when not in use. A modern design is shown with minimal detail and exposed fasteners. Blocking within the wall should be provided for adequate support. All NANZ plated and patinated finishes are available.